Lenze DSD User Manual download pdf (Page 203)

100

101

Lenze · Drive Solution Designer · Manual · DMS 4.2 EN · 12/2013 · TD23 203

7Applications

7.22 Winding drive for rewinder/unwinder

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

7.22.2 Unwinder (single)

Unwinders are used in many production processes. They store continuous material and feed it to a

production process which can be carried out in a continuous or discontinuous manner.

The roller of a single rewinder can only be changed at standstill. The winding drive is braked to

standstill and then accelerated to production speed again after changing the roller. A web accumu-

lator serves to change the roller without the need for a production downtime. When the winding

drive is at standstill, the web accumulator feeds the winding material to the production process.

Materials to be processed are e.g.: homogeneous webs (e.g. paper webs), fabrics, meshwork, wires,

threads or fibres. From a mathematical point of view, the wound up material is a spiral. Depending

on the application range and industry sector, the spiral is called reel, spool, coil or tree.

There are two winding technologies:

• Lay-up winding (e.g. foils, paper, plates).

• Filament winding (e.g. threads, fibres, wires, cables). This winding technology is not supported

by DSD.

The requirements for the winding drive depend on the winding material and may be very high:

• High speed and torque setting ranges.

• Dynamic phase must not have any negative impacts on the tensile force.

1 2 ... 198 199 200 201 202 203 204 205 206 207 208 ... 495 496

Comments to this Manuals

No comments

Lenze DSD User Manual Page 203

Comments to this Manuals

Related products and manuals for Software Lenze DSD