Lenze EtherCAT Controller-based Automation User Manual download pdf (Page 160)

11 Defining the cycle time of the PLC project

11.1 Determining the task utilisation of the application

160

Lenze · Controller-based Automation · EtherCAT® Communication Manual · DMS 6.4 EN · 04/2014 · TD17

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

11 Defining the cycle time of the PLC project

This chapter provides information on how to ...

•die Determining the task utilisation of the application

( 160);

•das Optimising the system

( 162).

11.1 Determining the task utilisation of the application

In the online mode, the Monitor tab of the Task Configuration shows current status details and

measurements of the cycles, cycle times, and jitters of the tasks contained.

The values are updated in the same time interval as that used for monitoring the values from the

controller.

If the cursor is on a task name field, the values displayed can be reset to 0 by the Reset context menu

command (right-click the task name field).

1 2 ... 155 156 157 158 159 160 161 162 163 164 165 ... 204 205

No comments

Lenze EtherCAT Controller-based Automation User Manual Page 160