Lenze E82ZAFIC010 User Manual download pdf (Page 58)

Codetabelle

Communication−relevant Lenze codes

EDS82ZAFIC EN 2.0

10.1 Communication−relevant Lenze codes

C1510:

Configuring process input data

Code

C1510

Name

Configuring process input data

Index

0x5A19 (23065)

Subcode Lenze Values Access Data type

1 PIW1 18

see table below rw FIX32

2 PIW2 3

3 PIW3 4

4 PIW 4 5

þ Parameter set transfer

The assignment of the bit status information or actual values of the controller to the max.

4 process input data words (PIW) of the master can be configured freely.

) Note!

For reasons of compatibility, subcodes 5 and 6 can also be read and written

with modules from software version V3.0. However, this has no effect.

Selection Scaling

1 FIF status word 1 (FIF−STAT1) 16 bits

2 FIF status word 2 (FIF−STAT2) 16 bits

3 Output frequency with slip (MCTRL1−NOUT+SLIP) ±24000 º ±480 Hz

4 Output frequency without slip (MCTRL1−NOUT) ±24000 º ±480 Hz

5 Apparent motor current (MCTRL1−IMOT) 2

º 100 % rated device current

6 Actual process controller value (PCTRL1−ACT) ±24000 º ±480 Hz

7 Process controller setpoint (PCTRL1−SET) ±24000 º ±480 Hz

8 Process controller output (PCTRL1−OUT) ±24000 º ±480 Hz

9 Device utilisation (MCTRL1−MOUT) ±2

º ±100 % rated motor torque

10 DC−bus voltage (MCTRL1−DCVOLT) 16383 º 565 VDC at 400 V mains

16383 º 325 VDC at 230 V mains

11 Ramp function generator input (NSET1−RFG1−IN) ±24000 º ±480 Hz

12 Ramp function generator output (NSET1−NOUT) ±24000 º ±480 Hz

13 FIF−OUT.W1 16 bits or 0 ... 65535

14 FIF−OUT.W2 16 bits or 0 ... 65535

15 FIF−OUT.W3 0 ... 65535

16 FIF−OUT.W4 0 ... 65535

17 DRIVECOM control word (DRIVECOM−CTRL) 16 bits

18 DRIVECOM status word (DRIVECOM−STAT) 16 bits

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 70 71

Comments to this Manuals

No comments

Lenze E82ZAFIC010 User Manual Page 58

Comments to this Manuals

Related products and manuals for Hardware Lenze E82ZAFIC010