Lenze E82ZAFIC010 User Manual download pdf (Page 13)

Technical data

General data

EDS82ZAFIC EN 2.0

4 Technical data

4.1 General data

Field Values

Order designation E82ZAFIC001 (coated)

E82ZAFIC010 (PT version)

Communication medium RS485

Network topology Ring (go and return line in the same cable)

Number of bus nodes Dependent on INTERBUS master (e.g. Phoenix Contact G4 master).

For the following data, which depend on whether PCP communication is

used or not, always the smaller value applies:

l with PCP communication: max. 62 or

l without PCP communication: max. 256/number of PCDs

Distance between two bus nodes Max. 400 m

INTERBUS identification

(ID code)

l With 1 word PCP: 227 (0xE3)

l Without PCP: 3 (0x03)

Drive profile DRIVECOM profile "Drive technology 20"

INTERBUS node Slave

Baud rate 500 kbps

Process data words (PCD), 16 bits 1 ... 4 words

Parameter data words (PCP),

16 bits

0 or 1 word

PDU length Max. 64 bytes

Supported PCP services l Initiate

l Abort

l Status

l Identify

l Get−0V−long

l Read

l Write

Communication time l Sum of the cycle time and the processing time in the bus nodes. The

times are independent of each other.

l Processing time in the standard device

– Parameter data (PCP): approx. 30 ms + 20 ms tolerance

– Process data (PCD): approx. 3 ms + 2 ms tolerance

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 70 71

No comments

Lenze E82ZAFIC010 User Manual Page 13