Lenze E82ZAFIC010 User Manual download pdf (Page 45)

Process data transfer

DRIVECOM control

Bit control commands

EDS82ZAFIC EN 2.0

7.2.4 Bit control commands

Bit control commands

The bit control commands of the control word depend on other bit

settings. The command is executed only for the following bit patterns:

Bits of the control word Note

Command Meaning 7 6 5 4 3 2 1 0

Standstill From different device states ð "Ready to switch

on"

x x x x x 1 1 0

1: Bit set

Switch on

Transition ð "Switched on" x x x x x 1 1 1

Enable operation Transition ð"Operation enabled"

The controller inhibit (CINH) is deactivated.

x x x x 1 1 1 1

0: Bit not

set

Inhibit operation

Transition ð "Switched on"

The controller inhibit (CINH) is activated.

x x x x 0 1 1 1

Inhibit voltage Transition ð "Switch−on inhibit"

The controller inhibit (CINH) is activated.

x x x x x x 0 x

x: Any bit

status

Quick stop (QSP)

Transition ð "Switch−on inhibit"

If the drive has been enabled ð controlled

deceleration via the quick stop ramp.

x x x x x 0 1 x

Reset fault Reset fault

If the fault has been removed, automatically ð

"Switch−on inhibit".

ð1

x x x x x x x

Reset fault

RFG zero

RFG stop

Inhibit RFG

Enable operation

Quick stop (QSP)

Inhibit voltage

Switch on

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 70 71

Comments to this Manuals

No comments

Lenze E82ZAFIC010 User Manual Page 45

Comments to this Manuals

Related products and manuals for Hardware Lenze E82ZAFIC010