Lenze 931E/K Small Drives Control User Manual download pdf (Page 182)

Appendix

Parameter set management

General information

182

SW−HB 13.0002−EN 4.1

10.6 Parameter set management

10.6.1 General information

For trouble−free motor control with the 931E/K servo positioning controller, the

characteristics of the 931E/K servo positioning controller must have been set correctly. In

the following, the individual characteristics will be referred to as parameters; the total of

all parameters for a servo positioning controller/motor combination will be referred to as

parameter set.

The below figure describes the parameter set management:

931E_126

Fig. 36 Online parameterisation

0 PC

1 *.DCO file

2 Small Drive Control (SDC)

3 Reading from file and saving in servo

4 Reading from servo and saving in file

5 Serial communication

6 Servo controller

7 RAM

8 Flash

9 Default parameter set

: Controller reset

; Saving the parameter set

< Loading the standard parameter set

1 2 ... 177 178 179 180 181 182 183 184 185 186 187 ... 197 198

No comments

Lenze 931E/K Small Drives Control User Manual Page 182