Lenze 931E/K Small Drives Control User Manual download pdf (Page 160)

Appendix

Communication interfaces

Control via the serial interface

160

SW−HB 13.0002−EN 4.1

Setting the RS232 communication parameters

Select the menu Options W Communication W Baud rate to increase the baud rate to the

Actual data transfer rate:

931e_332

For this, select a Preferred data transfer rate. The program will try to build up

communication with the selected baud rate. The preferred baud rate will be accepted or

reduced to a lower baud rate. The implemented baud rate will be indicated as Actual data

transfer rate.

This baud rate is used for the "standard" online communication with the servo positioning

controller. For the firmware download, a separate baud rate will be selected.

Open the menu Options W Communication W COM port to select the COM port for

communication between the parameterisation program and the servo positioning

controller:

931e_334

1 2 ... 155 156 157 158 159 160 161 162 163 164 165 ... 197 198

No comments

Lenze 931E/K Small Drives Control User Manual Page 160