Lenze PLC Designer ApplicationTemplate (PLC Designer R3- User Manual download pdf (Page 60)

Working with the ApplicationTemplate

Integrating I/O modules of the I/O system 1000 with a machine module

Lenze · ApplicationTemplate · 1.3 EN - 04/2013

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

8.9 Integrating I/O modules of the I/O system 1000 with a machine module

This chapter describes in which way the modules of an I/O system connected via CAN can be

accessed from a machine module.

Example: Access three digital inputs/outputs and one analog input /O system 1000 from the

MM_Module1 machine module.

 How to proceed:

1. Right-click I_O_module_coupler

• Execute the Start Search menu command

The following dialog window shows all I/O modules identified.

•Click the Copy all device to project button to insert all devices found into the project.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 176 177

No comments

Lenze PLC Designer ApplicationTemplate (PLC Designer R3- User Manual Page 60