Lenze Controller 3200 C Operating Instructions User Manual download pdf (Page 33)

Electrical installation

Interfaces for peripheral devices

Ethernet interface

Lenze ¯ BA_3231C ¯ 5.0

6.4.3 Ethernet interface

Figure Connection Connection type Cable type

X3 / X4:

Ethernet

X3 LAN1b (internal switch)

X4 LAN1a (internal switch)

RJ45 socket

Network cable

CAT5e S/FTP

(recommended)

Max. cable length 100 m

IPC001

 Note!

If the RJ45 plug connection is exposed to oscillating or vibrating stress:

¯ Use a strain relief in the immediate vicinity of the RJ45 socket.

¯ Select the contact surface on which the device is mounted as fixing

point of the strain relief.

¯ Comply with the related minimum bending radius of the cable used.

The Controller can be connected to the higher−level network via X3 (LAN1b) or X4

(LAN1a). If the application comprises several Controllers, these can be networked in a

line network via the second LAN interface.

Baud rates: 10 or 100 Mbps

Fig. 6−2 Beispiel: 3241 C am Ethernet−Netzwerk

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 39 40

No comments

Lenze Controller 3200 C Operating Instructions User Manual Page 33