Lenze Drive Server Bus server S7 getting started User Manual download pdf (Page 19)

Busserv er S7

80 Busserver S7 DE/EN 1.0

4.2.6 Manual addition of drives

As an alternative to using the scan function, you can add the drives manually to the configuration.

1. Select the PLC to which you want to add a device from the tree structure.

2. Click Add device.

3. Use the Name input field to e nter a name for the device and confirm with OK.

– The name of the new device may only contain letters. It must not contain any spec ial

characters.

The device will be added with the entered name as a configuration entry to the tree structure, and you

can now co nfigure its parameters in the text fields on the right.

4.2.7 Drive parameters

Parameter name Meaning

DP Address of the Device PROFIBUS address

Timeout Maximum time in [s] the bus server will wait for the processing of a

parameter command.

• When the parameter sets are transferred, many commands are

simultaneously transmitted. Depending on the cycle time o f the CPU,

waiting times between 20 - 30 s may therefore occur.

• If problems occur during parameter set transfer, try a higher timeout

setting first.

Show/Hide Bookmarks

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 62 63

No comments

Lenze Drive Server Bus server S7 getting started User Manual Page 19